Fans are indispensable items for the hot days or when we need a more airy environment. People who stay indoors are often the ones who suffer the most from the effects of heat. Learn how to clean the fan:
This is because in places such as offices, there are many electronic devices, high-performance lamps, printers, computers and they throw a lot of warm air into the environment.
The fan, whether ceiling or floor, is the solution to give some freshness in these cases or on days with very high temperatures. The point is that they collect dust and debris when used.
If you have never paid attention to whether your fan is dirty or whether it is suitable for use, then check out the tips in our article today.
Why is it important to clean the fan?
The fan is equipment that consists of blades that circulate the air from a rotating movement. When these blades or other components of the device are filled with dust or debris attached, the powder is then released into the environment.
All of this dust floating in the air will cause or exacerbate breathing problems and allergies for those who live in it, and so it is very important that your fan is always clean and ready to use.
The materials required to clean a fan may vary depending on the type of device. If it is a ceiling or floor, if it is portable or tower type. As a rule, you need the following items:
- Screwdriver or Phillips key
- Dry cloth or absorbent paper
- Neutral detergent
Step by step to clean the traditional fan
1. Turn off the device
Never carry out maintenance or cleaning work on electrical devices when they are plugged in. To ensure your safety, do not simply leave the switch in the off position, it is important that the socket is disconnected from the wall.
2. Disassemble the device
Conventional fans typically have a casing around the fins to protect the user, but this casing prevents you from cleaning every corner where dust and dirt get in the way. For cleaning to be effective, disassemble the fan using the screwdriver and manufacturer guidelines.
3. Clean the parts
Remove most of the dirt with a soft brush. If the fan has not been cleaned for a long time or if it is exposed to grease, remove as much of the thicker dirt as possible in this step.
4. Wash the parts
Clean the parts thoroughly with water, neutral detergent and a soft sponge until all dirt is removed. Do not throw water on parts with electronic components. These should be cleaned with a soft brush or a dry cloth.
5. Dry the parts
Dry all parts that have been washed in soapy water thoroughly with a soft cloth or absorbent paper.
6. Mount the device
Assemble the fan by attaching all the parts in the right places and fixing everything correctly. If you want, add a drop of lubricating oil to the propeller sleeve to work better. When assembling the propeller, check the marking that indicates the side to be inserted.
Step by step to clean a ventilated tower
1. Turn off the device
Never clean electrical devices while they are plugged in. Therefore, disconnect the device from the power supply before cleaning.
2. Clean the outside
Wipe the outside of the fan thoroughly with a cloth dampened with water and a mild detergent. Try cleaning in an open or well-ventilated area to prevent dust from causing breathing problems.
3. Disassemble the grill
Make sure your fan model has a collapsible grille and remove it from the spot. Clean as much as possible with a soft brush and a damp cloth with water and a mild detergent. If your model doesn’t have a removable grille, use a soft, dry brush with soft bristles that won’t damage the inside of the device.
4. Turn on the fan
During cleaning to make it easier to remove dirt, turn on the fan a few times to let the dust escape. Do not stand in front of the air outlet at this time so that dust and dirt do not come into contact with your airways.
5. Replace the grill
Put the grille back on and wipe the outside of the fan with a damp cloth.
Step by step to clean the ceiling fan
1. Turn off the device
Make sure the fan is off. To avoid accidents, we suggest that you turn off the circuit breaker that powers the device.
2. Use something to upload
It is not easy to assemble and disassemble a ceiling fan, so you have to climb a ladder, bench or chair and clean the fan components by attaching them to the ceiling yourself.
3. Use a pillow case
Attach a pillowcase to each fan blade separately and press the fabric down. Grasp the opening of the pillowcase with one hand so that all the dirt protrudes from the blades. When you’re done, just twist the back cover and throw the dust in the trash.
4. Clean the blades
The blades are not fully fixed, so wipe them gently and avoid leaning on them, otherwise you can break the fan and fall off. Use a cloth dampened with water and a mild detergent.
5. Dry the blades
Dry the blades thoroughly with a soft cloth or absorbent paper and your fan is now ready for use.
Important tips for cleaning the fan
- The fan blades can have sharp edges, so wipe them carefully so that you are not injured.
- You can use the vacuum cleaner to remove the thick dirt from the slats and grilles of the device before washing the plastic or metal parts.
- Create a cleanup calendar. On hot days, if the device is used extensively, clean every 15 days (floor, conventional or ceiling).
- Carry out monthly cleaning in winter as the equipment remains unused for longer.
- Do not install the fan with wet parts, always dry the removed parts thoroughly before installing them.
- If your fan has metal parts, invest in a metal polish so that it looks new after cleaning.
- Always refer to the operating instructions for your fan before you disassemble it.
Cleaning the fan is often one of the tasks that go completely unnoticed. It is very common for people to forget that this device needs to be cleaned frequently or that it can lead to illness if it is not cleaned. After you’ve seen our tips on cleaning your ventilators, get going!