Porcelain stoneware is a material that is found in interior floors for its beauty, elegance and durability. In addition, this type of coating is available in different colors and textures and is very versatile, as it can be installed both on the floor and on the walls. By the end of this article, you will know how to properly clean porcelain stoneware :

In addition to being beautiful and durable, the porcelain stoneware tile has low water absorption, which keeps its properties longer, the coloring is very even and it is very resistant to physical and chemical abrasion.


Of course, this is a higher option compared to ceramic tile, but it is usually worth it.

Types of porcelain tiles

How to clean porcelain: environment that takes the material

Because it is an extremely versatile product, there are several types of porcelain stoneware available for use in any home setting. Check the details of each of them:


Polished porcelain

Polished porcelain coatings are the best known. They have the smoothest surface because they are given a polish and protective coating. They are especially recommended for dry areas such as rooms, corridors and bedrooms as they are extremely slippery when wet.

Enamelled porcelain stoneware tiles

Here the pieces are given an enamel layer with the desired design. They can be smooth or rough, shiny or matte. It’s a coating that can be used for home, commercial, and even industrial use.

Porcelain satin

The satin finish has a matt surface and is more scratch and dirt repellent than polished. If you are looking for a less shiny floor, then you need to invest in satin porcelain stoneware.

Rustic porcelanato

This is best for outdoor and wet areas such as saunas, bathrooms, garages, and pool decks. It has a slightly abrasive surface, is even harder than other types of finish and not very slippery.

How to clean porcelain

First cleaning – after work

to seat porcelain floor

The first cleaning of your floor should be up to 15 days after the grout is applied and, if done well, will help prevent stains and make it easier to maintain your floor throughout the life of the product.

This post-work cleaning should be done carefully to avoid scratching the polished porcelain, and all you need is a sponge dampened with water.

The first step is to slowly pass the damp sponge and watch for any residue of abrasive materials such as cement, mortar and grains of sand.

Then apply a special product for cleaning after work, suitable for this type of coating. Easy to find at hardware stores, these products will remove stains and grime so the floor looks perfect.

How to clean porcelain: clean the mortar

How to clean porcelain tile: sponge

On many occasions the grout also needs to be cleaned and this task is easy too. Wait at least 7 days after applying the first cleanse and use a specific post-diluted product in water. Let the product sit on the box for the specified time and wipe it with a soft sponge.

The mortar can also be cleaned with creamy soapy water. Simply apply the product with an undiluted sponge and leave it on for 10 minutes. Then wipe with the yellow part of the sponge.

Before applying any other products, it is a good idea to do a test to see if it won’t damage the floor.

Dilute the product in water and apply only to part of the piece. Look for stains or discoloration.

Vinegar is also a great homemade product to use to clean your porcelain tile, as it helps remove excess grout from the tile without damaging your floor.

How to clean porcelain: Daily cleaning

How to Clean Porcelain with Vacuum Cleaner

The porcelain tile is a very simple material that ensures cleanliness. Basically you need:

  • A soft broom or vacuum cleaner;
  • Neutral detergent diluted in water;
  • Dry towels;
  • Alcohol or clean glasses.

The process is simple, you should first sweep the floor with the soft bristle broom to remove most of the dirt. If you prefer, vacuum with the nozzle which has a brush to prevent scratching your floor.

Prepare the cleaning solution by diluting a tablespoon of neutral detergent in 2 liters of water with a few drops of clean glass solution. Apply to the floor with a slightly damp cloth.

Repeat as many times as necessary to remove any dirt, then wipe with a soft cloth.

If you want, you can do the daily cleaning by rubbing the solution with a paintbrush or the soft-bristled broom, then wiping the floor with a soft cloth. Never leave your floor too wet.

How to Clean Porcelain: More Cleaning Tips

How to Clean Porcelain with Cleaning Tips

We still have some cleaning tips for you:

  • Since the neutral detergent does not leave this cleaning scent in the air, use a perfumed room spray or diffuser.
  • Pen ink smears, watercolor pencils, nail varnishes or other pigments can be removed with alcohol, thinner or acetone. But apply just enough to remove the stain and dry immediately.
  • In the case of residents who are allergic to cleaning products, use vinegar diluted in water to remove dirt from your china floor. The vinegar does not discolour, does not damage the shine and cleans the surface very well.
  • Satin and rustic porcelanatos, because they don’t have that glossy layer, are easier to clean and you can enjoy scrubbing.
  • If you accidentally knock over alcohol or coffee, dilute a small amount of bleach in a 200 ml container with water and use a soft sponge to apply the mixture only to the stained area. Clean thoroughly with clean water and never apply product directly to the floor.

What to avoid when cleaning your porcelain stoneware tiles

The porcelain tile is a floor that has considerable durability, but it is always good to be careful when cleaning to avoid scratches or stains and to keep it shiny at all times. The products to avoid at the time of cleaning are:

  • Saponate powder;
  • Hard bristle brushes;
  • Liquid or paste wax;
  • Washing powder;
  • Ammonia;
  • Sanitary water;
  • Caustic soda;
  • Products containing hydrofluoric acid;
  • Steel wool.

Make sure that your porcelain stoneware tiles are well preserved

How to Clean Porcelain: Tips to Keep This Floor Always Clean

Follow these steps to get a porcelain tile floor:

  1. Clean your porcelain stoneware tiles as soon as an “accident” has occurred, as the material soaks the floor and causes permanent stains.
  2. If you use and abuse carpets, especially at the entrance to the house or room, you will reduce the dirt on the floor.
  3. Do not mix detergents. This is a very common habit among housewives or those in charge of cleaning that can damage your floor.
  4. Put felt under the furniture to reduce the chance of scratching the floor while moving furniture.
  5. Avoid cleaning all rooms with the same cloth.
  6. Never use rough utensils such as steel wool or the green side of the sponge.

As mentioned earlier, porcelain stoneware flooring is more robust and gives your home a very elegant finish so it deserves the maintenance you need to keep it fresh longer.

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here