From time to time everyone likes to renovate the decoration and change the atmosphere of the rooms in the house. Since not everyone can afford a complete renovation including new furniture, one of the easiest ways to give a new look is to change the color of the walls. Today you know how to material on the wall brings

And you don’t even have to touch all the walls to renovate your corner, just add a little color and you will make your room the best place in the world.


The first thing that comes to mind when changing the color of a wall is a brush and paint, but depending on the size of the wall, this might not be the easiest solution. Especially if you want to make the change yourself.

Did you know you can put fabric on walls ? For this is a very interesting alternative to renew the look of a room with ease and without a lot of clutter. We will teach you how to do it!

Benefits of using wallcovering

Environment with fabric for wall

One of the main advantages of lining a wall with fabric is that you can apply it yourself without having to hire skilled labor.

In addition, the fabric costs much less than the wallpaper. A 10 meter roll of wallpaper ranges from $ 60 to 300 reais, depending on the type of material and brand, and covers approximately 5 square meters of wall. It usually takes 2 to 3 rolls to complete the wall and the leftovers are rarely reused.

In the case of fabric, you can find prices from R to R meters with the standard 1.40m width that guarantees a smaller amount of fabric to finish off a wall. It’s the right economy.

The fabric also has the advantage of being found in different prints and textures, the application is made only with white glue and water and not the specific glue for wallpaper, which is also higher in cost.

When you get tired of the chosen pattern and want to change it up again, the fabric is much easier to draw than the background image.

What kind of fabric to choose

When buying fabrics to coat the wall, give preference to 100% cotton tapestry or tricoline fabrics, which have elastane in their composition, as they are resistant to light and heat.

Very fine fabrics such as silk have a shorter shelf life and require more care when using, as they can easily tear. Flax gives the environment a very refined air, but it must also be applied more closely.

The gorgorão or gorgurinho are also good options because they are very tough and strong, which makes them easier to use because they don’t fold as easily, but because they are heavier they can easily take off. Capriche in the glue if you are using this type of fabric.

It is important to see what the condition of the wall is when choosing a light-colored fabric that has a very fine texture because it will let you pass any imperfections or the color of the paint when it is dark.

Before attaching the fabric to the wall, test the water and glue mixture to see if there are any stains, loses color, or fades. Okay with the fabric, you can already put your hand in the dough.

Materials needed to put fabric on the wall

Materials needed to put fabric on the wall

You will need the following materials to put fabric on the wall:

  • White glue;
  • Water;
  • Foam roller;
  • Stilett;
  • Scissors;
  • Spatula;
  • Nails.

Step by step to get fabric on the wall

Step by step to put fabric on the wall

There are two ways to apply the fabric to the wall. You can apply it like wallpaper, by applying the diluted glue with water to the entire surface and sticking the fabric or just sticking the glue undiluted to the edges of the fabric.

1. With diluted glue

In a container, dilute the white glue (can be school glue) in water in a 50/50 ratio. Mix well and it’s ready to use.

Measure the fabric according to the height of the wall, leaving scraps on the sides as your wall may not be completely straight, this will avoid having any part of it without fabric.

Remove light mirrors, shelves, and any wall mounts. Check the condition of the wall before starting, it is interesting to clean it thoroughly with a damp cloth to remove dust and dirt.

Ideally, start from top to bottom, using the roller shaft moistened in the diluted glue, distribute the mixture over the entire wall surface and glue the fabric.

To facilitate adhesion, you can tap a nail, thumbtack, or bed bug in the corners just to set the fabric in place, not deepen over the nail.

With a spatula, you will remove possible imperfections and air bubbles.

After the fabric has dried well, use the scissors and stylet to trim the leftover fabric by cutting off the leftover fabric.

Instead of the switches, make a cut around the box so the leftover is in the wall, then just put the mirrors on top of it.

2. Do not thin the glue

Illustrative photo of common white glue to put fabric on the wall

This method is faster and easier, but may not work very well on very heavy fabrics as the idea is to only glue on the edges.

Secure the fabric to the wall with a nail, thumbtack, or bug, and run the glue directly onto the wall without diluting it in water.

Using a spatula, glue the fabric around the whole wall and, after very dry work, do the job by cutting the scraps with the scissors and pencil.

Remove the nails after at least a day to make sure the fabric adheres well and does not peel off.

Tutorials for putting fabric on the wall

Pictures and videos speak more than text. So we selected independent channel videos that show two different approaches to attaching tissue to the wall:

Tips for cleaning and storing fabric on the wall

When cleaning the fabric, be careful not to remove any part of the wall. Vacuum cleaner to remove most of the dirt, then wipe with a damp cloth with mild soap and water.

Warning: the fabric must be almost dry, because if you overdo the moisture, the glue will become soft and the fabric will lose its grip.

Photos of environments with fabric on the wall

And to inspire your choice, you can get to know more environments decorated with fabric, and if you want to see more photos, check out our article on wall cloths

Image 1 – Light fabric for a neutral decoration.

Lightweight fabric for neutral decor

Photo 2 – Bring nature indoors in a foliage pattern fabric.

Wallcovering with foliage pattern

Image 3 – Color and life for the environment in a fabric with floral prints

How to put fabric on the wall: practical and step-by-step tips

Image 4 – Another floral inspiration in the fabric

How to Put Fabric on the Wall: Practical and Step-by-Step Tips 1

Image 5 – This fabric still forms a beautiful landscape in the area.

Wall fabric with landscape

Image 6 – Rely on colors and versatile prints that you can use in almost any setting

Versatile wallcovering

Picture 7 – Fabric for the wall stamped with blue.


Blue prints in fabric for wall

Image 8 – Scandinavian print fabric.

Scandinavian style in the fabric pattern for wall

Image 9 – Fabric for the wall with arabesque.

Wall fabric with arabesque

Image 10 – Fabric for the wall with patterns of nature.

Nature print

Image 11 – To decorate the dining room

Dining room with fabric on the wall

Figure 12 – Cut out fabric to decorate part of the wall (like a picture)

Trimming of fabric for wall

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here