Mold is nothing more than the propagation of fungi, especially in hot and humid environments, places that are more than likely to install and reproduce. It is the shape that causes the smell of enclosed space or objects that are stored and that bothers. Learn How To Smell Musty Today :

The point is, mold is not only annoying because of the odor, it is also a problem for the health of residents, especially those who have respiratory allergies.

The good news is that there are good alternatives to stop the problem and prevent it from coming back without spending too much or having too much work. Check out the tips we’ve gathered in this article to help you fix this problem.

Finding the origin of mold

The first step in getting rid of the smell and shape is to locate where it is installed. In some cases, pinpointing the problem is very easy, in general, poorly ventilated and humid environments tend to develop fungus.

It is common to find in the built-in closets, especially in the under-used areas like luggage racks and tall shelves, or in damp places like the bathroom and laundry room.

In other cases it is more complicated to find the origin of the odor, then it will be necessary to circulate through the environment, carefully considering each area. Check behind the furniture, carpets, under and around mattresses, and blackboards.

How to clean mold and smell

Since mold is a fungus, you should use a solution of alcohol, vinegar, or bleach and water to clean stains found on furniture, for example. In a bucket, add 100 ml of bleach to every 1 liter of water and use a soft cloth soaked in the solution to remove stains on walls, tiles, and furniture. Wipe the cloth with a dry cloth. If stains are difficult, repeat the process with a soft sponge.

It is more difficult to remove mold stains on fabrics because it is not always possible to add bleach. Look for specific products or use white vinegar.

In the case of clothes, you can use the following homemade recipe: Mix 3 tablespoons of baking soda and 1 tablespoon of salt for every liter of water. Boil clothes in this solution for about 1 hour, rinse well in cold running water and dry normally.

Mix 1 cup of fabric softener and 1 cup of alcohol in 1 liter of water and apply this solution to laundry with a sprinkler before ironing. Let the clothes dry completely before storing them.

If the problem occurs on mattresses, spread baking soda all over the surface of the mattress and wait about 30 minutes. Then simply vacuum with a vacuum cleaner and the fungus and the stench are gone.

Stop the smell of mold

Mix a liter of alcohol with 1/3 of the same amount of clove and leave for 24 hours. Clove has antifungal properties and also scents the environment. Use this mixture in a spray nozzle and apply around the cupboards to remove the scent.

Caring for the application, you should expect to dry well before handling objects and especially clothing as the carnation will dissolve a dark stain that can stain your clothing.

You can also scatter bags made of tulle or TNT with blackheads inside, or even cedar wood pellets around the area. Cedar balls eliminate bad odor and absorb moisture.

White vinegar works well in the home like cabinets and cupboards. Put a container of white vinegar in the cupboard and let it stand overnight. The next day, wipe the entire piece of furniture with water and wait until it is dry before storing it.

Homemade recipes work well, but there is a very suitable product for damp areas or to cleanse and prevent the formation of mold, which is lysoform. If none of the above tips work, then Lysoform can solve the problem.

How to Make a Homemade Anti-Mold

The carcasses found on the market are made from calcium chloride, a product that absorbs moisture from the environment. You can prepare this type of product at home using the following materials:

• Plastic cups, one larger than the other to sit on (you can use yogurt cups, disposable cups, and even reuse the anti-mold containers bought in the market);
• Calcium chloride powder or granules (can be found in chemical stores);
• Filter paper for coffee grounds;
• Needle, pen, or other piercing object;
• Elastic ties for tying;

Drill holes in the bottom of the smaller pot and fill it with calcium chloride. Snap the larger pot into place so there is an empty space below. It is in this room that will collect the water that comes from the humidity of the environment.

Place a piece of paper filter over it and tie it with a rubber band. Your anti-mold is ready.

If you want to reuse the machine you bought on the market, open and dismantle all the packaging, throw the rest of the granulated chloride in the trash, and throw away the water that has accumulated in the bottom. Avoid contact with this water.

Replace the packaging, fill it with calcium chloride and wipe a piece of paper filter over the top with a rubber band. It’s ready to use.

To avoid mold in surroundings

The problem with mold is that if you have a very humid environment or it will happen frequently, maintenance should be constant. So follow some of the tips below to keep him from bothering you:

• Try to ventilate the area as much daily as possible;
• Put chalk in the corners of the rooms, it will help build up moisture;
• Preferably use waterproofing or anti-mold inks to avoid moisture and stains on the walls.

Now that you already know how to tackle this problem, which also occurs in busy homes, roll up your sleeves and get to work! Your health deserves to say goodbye to mold.